KS Maths
Keith Spencer

MYP and IB Diploma mathematics

IB and MYP maths common mistakes, and how to fix them.

Every row below is a slip that students make again and again, taken from the lesson that teaches the fix. Read the mistake, check it against your own working, then open the lesson for the full worked example.

MYP Year 7 45 mistakes

Number systems and place value: how numbers are built

Common factors and multiples

The mistakeUsing the smaller count of a prime for the LCM. 4 = 2² and 10 = 2 × 5, so the LCM needs 2² and 5: it is 20, not 2 × 5 = 10.

Why it happens, and the fixCheck: 4 does not divide 10.

Factors, multiples and primes

The mistake“all primes are odd, so 2 cannot be prime.” 2 has exactly two factors, 1 and 2, so it is prime.

Why it happens, and the fixIt is the only even prime.

Order of operations

The mistake“addition always comes before subtraction.”

Why it happens, and the fixThey share a level. 15 − 5 + 3 is 10 + 3 = 13, going left to right. Doing the addition first gives 15 − 8 = 7, which is wrong.

Place value and decimals

The mistake“0.3 is bigger than 0.45, because tenths are bigger pieces than hundredths.”

Why it happens, and the fixLine up the places: 0.30 and 0.45 have 3 and 4 tenths, so 0.3 < 0.45. The number of digits after the point says nothing about size, in either direction.

Powers, squares and roots

The mistake“∛27 is 9, because 27 ÷ 3 = 9.”

Why it happens, and the fixA cube root is not a third. It is the number used as a factor three times: 3 × 3 × 3 = 27, so ∛27 = 3.

Prime factorisation

The mistakePutting 1 in the list, as in 30 = 1 × 2 × 3 × 5. 1 is not prime, so it never appears in a prime factorisation.

Why it happens, and the fixLeaving it out changes nothing, because multiplying by 1 changes nothing.

Rounding and estimating

The mistakeDropping the zeros that hold the places. 5280 to the nearest hundred is 5300, not 53: the zeros keep the 5 in the thousands place.

Why it happens, and the fixThe lesson works through this one with a checked example.

Percentages: out of 100, and what changes

Finding the whole

The mistakeStopping at 1%.

Why it happens, and the fixIf 60% of a number is 39, then 39 ÷ 60 = 0.65 is 1% of the number, not the number. Multiply by 100: the number is 65.

Fractions, decimals and percentages

The mistakeThinking a longer decimal is a bigger number. 0.5 is greater than 0.45: as percentages they are 50% and 45%.

Why it happens, and the fixCompare the values, not the number of digits.

Increasing and decreasing by a percentage

The mistakeReading “reduced to” as “reduced by”.

Why it happens, and the fixReduced by 80% leaves 20% of the price (× 0.2); reduced to 80% leaves 80% of it (× 0.8).

Percentage change

The mistakeTaking the percentage off the new amount to go back. 300 up 20% is 360, and 20% of 360 is 72, not 60, so 360 − 72 = 288.

Why it happens, and the fixThe percentage was taken from 300, so it must be undone by dividing by the multiplier, 360 ÷ 1.2 = 300.

Percentage of an amount

The mistakeFinding 1% by dividing by 10. 1% is a hundredth: 1% of 360 is 360 ÷ 100 = 3.6, not 36. 36 is 10%.

Why it happens, and the fixThe lesson works through this one with a checked example.

What a percentage is

The mistake“a percentage can never be more than 100%.” 100% is the starting whole, not a ceiling.

Why it happens, and the fixA crowd that grows from 400 to 600 people is 150% of the old crowd: one whole and half of another.

Patterns, expressions and equations: describing what grows

Collecting like terms

The mistake“3x + 5y = 8xy.”

Why it happens, and the fixPut x = 2 and y = 1 in: 3x + 5y is 11 but 8xy is 16. x and y can stand for different numbers, so 3x + 5y is already as short as it can be.

Function machines

The mistake“To undo multiply by 3 then add 2, divide by 3 then take away 2.”

Why it happens, and the fixThe inverse steps are right, but the order is wrong. The last step went in last, so it comes out first: take away 2, then divide by 3. Check by running the machine forwards.

Growing patterns

The mistake“It keeps getting bigger, so it is linear.”

Why it happens, and the fixThe doubling pattern 2, 4, 8, 16 keeps getting bigger, but the gaps are 2, 4, 8, which are not the same. Linear means the same gap every time, whether it goes up or down.

Letters and expressions

The mistake“4(n + 7) and 4n + 7 are the same, because 4 and 7 are both in there.”

Why it happens, and the fixTry n = 3: they give 40 and 19. The brackets tell you which step to do first.

Solving simple equations

The mistake“3x + 4 = 19, so x = 19 ÷ 3 − 4.”

Why it happens, and the fixThat undoes the steps in the same order they were done. The 4 was added last, so it comes off first: 19 − 4 = 15, then 15 ÷ 3 = 5. Test it: 3 × 5 + 4 = 19.

Term-to-term and position rules

The mistake“The rule is 3n, because it goes up by 3.”

Why it happens, and the fixTry n = 1. The sequence 7, 10, 13 has first term 7, but 3n gives 3. The step is only the first part of the rule. Then fix the first term: 3n + 4.

Angles and constructions: reasoning about turns, lines and triangles

Angles in a triangle

The mistake“My triangle's angles add up to 178°, so this triangle is different.”

Why it happens, and the fixA drawn angle can be off by a degree or two when it is measured by hand. The proof shows that the sum is exactly 180° for every triangle, so a total of 178° means a measuring error, not a new kind of triangle. The same goes for a diagram marked “not drawn to scale”: find angles from the facts, not by measuring the picture.

Angles on a line and at a point

The mistake“The angle next to 65° on a line is 25°, because 90 − 65 = 25.” 90 is the total for a right angle, not a line.

Why it happens, and the fixOn a straight line the total is 180, so the next angle is 180 − 65 = 115. Ask: is this a line, a point or a right angle? Then pick the total.

Bisecting lines and angles

The mistake“I used a different setting on the compasses for each arc, as long as they cross.”

Why it happens, and the fixThe arcs have to use the same radius, or the crossing point is not the same distance from both ends, and the line it makes will not bisect anything. Keep the compasses locked, and do not let the setting slip between arcs.

Constructing triangles and angles

The mistake“A bigger radius makes a bigger angle.”

Why it happens, and the fixThe angle made by an equilateral triangle is 60° for every radius: only the triangle gets bigger. An angle is a turn, not a length, so changing the compass setting changes the size of the drawing and leaves every angle the same.

Parallel lines and transversals

The mistake“These two lines look parallel, so the angles are equal.”

Why it happens, and the fixLooks prove nothing: a 2° tilt is almost invisible. Only arrows on the lines, the symbol AB ∥ CD, or equal corresponding angles, say that two lines are parallel. If there is no such evidence, you may not use the F, Z and C facts.

Points, lines and angles

The mistake“The arm crosses 115 on one scale and 65 on the other, so I will take the one I read first.”

Why it happens, and the fixTwo readings that add up to 180 are the signal to stop and decide which scale has its 0 on your arm. Estimate acute or obtuse first, and the wrong reading will not fit.

Fractions: parts, points and operations

Adding and subtracting fractions

The mistake“Add the tops and add the bottoms.”

Why it happens, and the fixWhen the bottoms are the same, adding them as well doubles the number of parts and keeps the count, so the answer is half the right one (the second figure). When the bottoms are different, tops-plus-bottoms always lands between the two fractions (½ and ⅓ give ⅖), so it is never more than the larger one and cannot be their sum.

Comparing and ordering fractions

The mistake“⅗ and 4 divided by 7 are both more than ½, so they are equal.”

Why it happens, and the fixThe half benchmark only decides when one fraction is above ½ and the other is below. Here both are above, so recut them: over 35 they are 21 divided by 35 and 20 divided by 35, and ⅗ is greater.

Dividing fractions

The mistake“Flip the first fraction.”

Why it happens, and the fixOnly the fraction you divide by is turned over: 2 divided by 9 ÷ ⅝ = 2 divided by 9 × 8 divided by 5, not 9 divided by 2 × ⅝. The first fraction stays as it is.

Equivalent fractions

The mistake“Add 2 to the top and the bottom: ½ = ¾.” ½ has parts that are halves; ¾ has parts that are quarters and takes three of them.

Why it happens, and the fixAdding 2 to both changed the amount from half a bar to three quarters of it. Only multiplying (or dividing) the top and bottom by the same number keeps the amount.

Improper fractions and mixed numbers

The mistake“3 2 divided by 7 means 3 × 2 divided by 7.”

Why it happens, and the fixA mixed number is a sum: 3 2 divided by 7 = 3 + 2 divided by 7, which is a bit over 3. Three times 2 divided by 7 is 6 divided by 7, which is less than 1.

Multiplying fractions

The mistake“4 × 2 divided by 9 = 8 divided by 36.”

Why it happens, and the fixMultiplying the bottom as well takes 4 lots of 2 divided by 9 and then cuts every part 4 times smaller, which undoes the 4: 8 divided by 36 is just 2 divided by 9 again. A whole number is a fraction over 1, so 4 × 2 divided by 9 = 4 divided by 1 × 2 divided by 9 = 8 divided by 9.

Terminating and recurring decimals

The mistake“The calculator shows 2 ÷ 3 = 0.6666666667, so the decimal of ⅔ ends in a 7.”

Why it happens, and the fixThe display has room for ten digits, so it rounds the last one up. Long division gives a 6 every time: ⅔ = 0.666..., and no 7 ever appears.

Collecting and presenting data: from a question to a chart

Asking and collecting

The mistake“I asked real people and wrote down what they said, so the data must be right.”

Why it happens, and the fixPrimary data is first-hand, not automatically accurate. A leading question, boxes with gaps, or asking one corner of the group can all push the answers one way.

Bar charts and histograms

The mistake“The bar is 7 squares tall, so 7 students chose it.”

Why it happens, and the fixRead the height against the scale, not by counting squares. If every square stands for 5 students, a bar 7 squares tall shows 7 × 5 = 35 students.

Choosing and honest charts

The mistake“A line graph must start its axis at 0, just like a bar chart.”

Why it happens, and the fixA line graph is read for change, not for how tall each point is above the bottom, so a raised start is fine as long as the axis is clearly marked with where it starts.

Line graphs

The mistake“At week 4 the line is at 26, so the shoot grew 26 cm that week.”

Why it happens, and the fixThe height of a point is the total so far. The growth in one week is the difference between two neighbouring points: 26 − 18 = 8 cm.

Pie charts

The mistake“The angle is the number of students.”

Why it happens, and the fixIn a pie of 24 students a group of 10 is not 10°. Each student is 15°, so the group is 10 × 15 = 150°.

Tally and frequency tables

The mistake“A full group has four upright strokes, so it counts as 4.”

Why it happens, and the fixThe diagonal is the fifth stroke, drawn across the other four so the group stands out. One full group and two more strokes is 5 + 2 = 7, not 4 + 2 = 6.

Types of data

The mistake“It is written with digits, so it is numerical.”

Why it happens, and the fixA shirt number or a phone number is a number used only as a name. You would never add two shirt numbers together, so it is categorical, and nominal.

Perimeter, area and volume: measuring the edge, the surface and the space

Area of compound shapes

The mistake“The L-shape is labelled 10 m, 8 m, 4 m and 3 m, so its perimeter is 10 + 8 + 4 + 3 = 25 m.”

Why it happens, and the fixAn L-shape has six edges, and two of them carry no label. Find them by subtracting: 10 − 4 = 6 m and 8 − 3 = 5 m. Then 10 + 5 + 4 + 3 + 6 + 8 = 36 m. Trace the outside with a finger and make sure every edge you pass has a length.

Nets and surface area

The mistake“I can see three faces of the box, 6 by 3, 6 by 2 and 3 by 2, so the surface is 18 + 12 + 6 = 36 cm².”

Why it happens, and the fixA closed box has six faces. The three you cannot see are the same as the three you can: the base is like the top, the back like the front. The surface area is 36 × 2 = 72 cm². A net lays out every face so none are missed.

Perimeter and area of rectangles

The mistake“The plot is 13 m by 4 m, so its area is 13 + 4 = 17 m².”

Why it happens, and the fixAdding the two sides gives half the perimeter, not the area. Count the rows: 4 rows of 13 squares is 13 × 4 = 52 m². Before you write a unit, ask whether the number is a distance (m) or a count of squares (m²).

Same fence, different area

The mistake“The fence is 20 m, so a square pen has sides of 10 m.”

Why it happens, and the fixHalf the perimeter is a length and a width together, not one side. A square from 20 m of fence has four equal sides of 20 ÷ 4 = 5 m, and holds 5 × 5 = 25 m².

Area of triangles and parallelograms

The mistake“A triangle has a base of 2 m and a height of 50 cm, so its area is ½ × 2 × 50 = 50.”

Why it happens, and the fixThe two lengths are in different units, so the answer means nothing. Change one first: 2 m is 200 cm, so the area is ½ × 200 × 50 = 5000 cm², or 50 cm is 0.5 m, so it is ½ × 2 × 0.5 = 0.5 m².

Volume of cuboids and prisms

The mistake“A box is 2 m long, 50 cm wide and 40 cm high, so its volume is 2 × 50 × 40 = 4000.”

Why it happens, and the fixThe lengths are in two different units, so the answer means nothing. Change them all to centimetres first: 200 × 50 × 40 = 400 000 cm³. Or change them all to metres: 2 × 0.5 × 0.4 = 0.4 m³, which is the same amount of space.

MYP Year 8 24 mistakes

Ratio and proportion: comparing, sharing and scaling

Equal ratios and scaling

The mistakeCompleting 2: 5 =?: 30 by working out 30 ÷ 2 = 15.

Why it happens, and the fixThe 30 is in the second place, so compare it with the 5, the number in the same place: 30 ÷ 5 = 6, and the first number is 2 × 6 = 12. Check: 12: 30 simplifies to 2: 5.

Proportional relationships

The mistakeFinding k the wrong way round.

Why it happens, and the fixFor the point (10, 4), 10 ÷ 4 = 2.5, but y = 2.5x gives 25 at x = 10, not 4. k is y ÷ x: 4 ÷ 10 = 0.4, and 0.4 × 10 = 4.

Sharing in a ratio

The mistakeIn a 3: 5 share the larger share is 40, so “one part is 40 ÷ 8 = 5”.

Why it happens, and the fixBut 40 is not the total: it is the larger share, which is 5 parts. So one part is 40 ÷ 5 = 8 and the total is 8 × 8 = 64.

Simplifying ratios

The mistake“5 m to 80 cm is 5: 80, which is 1: 16.”

Why it happens, and the fixDifferent units cannot be compared as they stand. 5 m is 500 cm, so the ratio is 500: 80, which is 25: 4.

Solving proportion problems

The mistakeDividing the wrong way. 4 bananas cost 10 pesos, and 4 ÷ 10 = 0.4 is bananas for each peso, not the price of one banana.

Why it happens, and the fixSay the unit you want: pesos for each banana is pesos ÷ bananas, 10 ÷ 4 = 2.5 pesos.

What a ratio says

The mistake“The ratio of altos to sopranos is 3: 8, so the choir has 11 singers.”

Why it happens, and the fixThe ratio says only that the singers come in groups of 3 altos and 8 sopranos. The choir could have 22 singers (6 altos and 16 sopranos) or 33 (9 altos and 24 sopranos).

Integers: how far, and which way

Numbers on both sides of zero

The mistakeLeaving zero out.

Why it happens, and the fixZero is neither positive nor negative, but it is still an integer. The integers between −2 and 2 are −1, 0 and 1: three of them, not two.

Polygons, circles and prisms: finding the area and the space of shapes with no corners to count

Area of a circle

The mistakeSubtracting radii instead of areas.

Why it happens, and the fixA ring between a circle of radius 8 cm and a circle of radius 12 cm is 4 cm wide, but it is not a circle of radius 4 cm (3.14 × 4 × 4 = 50.24 cm²). It is the big circle with the small one taken away: 3.14 × 12 × 12 − 3.14 × 8 × 8 = 452.16 − 200.96 = 251.2 cm². The ring is long as well as wide, so it holds far more than a small circle.

Area of a trapezium

The mistake“Half of 5, plus 11, times 6.”

Why it happens, and the fixMultiplication goes before addition, so ½ × 5 + 11 × 6 = 2.5 + 66 = 68.5 cm², which is more than the whole rectangle 11 cm by 6 cm would hold. The half belongs to the two parallel sides added together: ½ × (5 + 11) × 6 = ½ × 16 × 6 = 48 cm². Add the parallel sides first, then take half, then multiply by the height.

Circumference and π

The mistakePutting the 2 with the diameter.

Why it happens, and the fixThe 2 in 2 × π × r turns a radius into a diameter, so it belongs only to a calculation that starts from the radius. For a plate 13 cm across, 2 × 3.14 × 13 = 81.64 cm would be two whole edges. The edge is a little more than three diameters, so a little over 39 cm: 3.14 × 13 = 40.82 cm.

Nets and surface area of prisms

The mistakeUsing a sloping side as the height of the end.

Why it happens, and the fixAn end that is an isosceles triangle with a base of 16 cm, a height of 6 cm and sloping sides of 10 cm has area ½ × 16 × 6 = 48 cm², not ½ × 16 × 10 = 80 cm². The sloping sides belong in the perimeter instead: 16 + 10 + 10 = 36 cm. Each length has one job: the height for the area of the end, the edges for the perimeter.

Regular polygons

The mistakeCutting from one corner instead of from the centre.

Why it happens, and the fixLines from one corner of a polygon give n − 2 triangles, which is how the angles inside a polygon are added up, but those triangles are different shapes and sizes, so one triangle's area cannot simply be multiplied. A hexagon cut from a corner gives 4 triangles of two different shapes; cut from the centre it gives 6 identical ones. For the area, always cut from the centre: n triangles, every one the same.

Volume of prisms

The mistakeMultiplying every length you are given.

Why it happens, and the fixA triangular prism has an end with a base of 6 cm, a height of 4 cm and two sloping sides of 5 cm, and a length of 7 cm. 6 × 4 × 5 × 7 = 840 is not its volume. The area of the end uses only the base and the height: ½ × 6 × 4 = 12 cm². Then V = 12 × 7 = 84 cm³. Work out the area of the end on its own line first, and then multiply by the length once.

Rates and conversions: how much for one

Converting units

The mistakeDividing two amounts that are in different units.

Why it happens, and the fixHow many 200 mL cups does a 3 litre bottle fill? 3 ÷ 200 = 0.015 cups cannot be right. Put both amounts in the same unit first: 3 litres is 3000 mL, and 3000 ÷ 200 = 15 cups.

Exchange rates and fair comparisons

The mistakeTurning a rate round by keeping the same number.

Why it happens, and the fixIf 1 peso = 4 rupees, then 1 rupee is not 4 pesos: a rupee is worth less than a peso, so it is a fraction of one. It is 1 ÷ 4 = 0.25 peso. Check by multiplying: 4 × 0.25 = 1.

Graphs of a constant rate

The mistakeDividing the run by the rise.

Why it happens, and the fixA line from (0, 0) to (5, 80), with hours across and kilometres up, rises 80 km over 5 hours. 5 ÷ 80 = 0.0625 is hours for each kilometre, which is not a speed. The speed is the rise over the run: 80 ÷ 5 = 16 km per hour. Read the units: the one up the side comes first, “per” the one across.

Rates and unit rates

The mistakeComparing two rates that are per different things.

Why it happens, and the fixA tap that gives 90 litres per hour is not faster than one that gives 2 litres per minute just because 90 is bigger than 2. Put them per the same time first: 2 litres in each of the 60 minutes of an hour is 2 × 60 = 120 litres per hour, so the 2 litres per minute tap is the faster one. Check the “per” before you compare the numbers.

Speed, distance and time

The mistake“Average speed is the two speeds added and halved.”

Why it happens, and the fixTry 20 and 60 km per hour over 60 km each. The mean is 40, but the journey takes 3 + 1 = 4 hours for 120 km, which is 30 km per hour. More of the journey is spent going slowly, so the slow speed counts for more.

Start values and falling rates

The mistakeMultiplying the start value by the time as well.

Why it happens, and the fixA value that starts at 35 and rises 3 each hour is 35 + 3 × 4 = 47 after 4 hours, not (35 + 3) × 4 = 152. The start is there once; only the rate is repeated for every hour.

Averages and spread: what is typical, and how much it varies

Box plots and comparing data

The mistakeReading a long box or whisker as “more values”.

Why it happens, and the fixA box plot shows where the quarters of the data lie, not how many values there are. A long whisker means the top quarter of the values is spread out over a wide range, not that there are more of them: in the last comparison the whisker is long because of a single time of 60.

Outliers and choosing an average

The mistakeDeleting an outlier because it “spoils” the average.

Why it happens, and the fixFirst ask whether it is an error, such as a typed 81 that should be 18, or a real value, such as the roadworks day. A real value that is left out changes the story the data tells. If you do leave one out, say so and say why.

Range, quartiles and the interquartile range

The mistakeSplitting the list before it is in order.

Why it happens, and the fixFor 9, 3, 8, 5 the first half as written is 9 and 3, which would give Q1 = 6. In order the list is 3, 5, 8, 9, so the lower half is 3 and 5 and Q1 is 4. As with the median, order first.

Stem-and-leaf plots, mode and median

The mistakeGiving a leaf as the value.

Why it happens, and the fixIn a plot of masses with the key 5 | 2 = 52 kg, the row 5 | 2 6 6 holds 52 kg, 56 kg and 56 kg. Its most common value is 56 kg, not 6: a leaf is only the last digit, and the stem and the key turn it back into the value.

The mean as a fair share

The mistakeLeaving out a value of 0.

Why it happens, and the fixA plant grew 4, 0, 6 and 2 cm in four weeks. The total is 12 cm over 4 weeks, so the mean is 12 ÷ 4 = 3 cm a week, not 12 ÷ 3 = 4. A week with no growth is still a week: a 0 adds nothing to the total, but it does count as a value.

MYP Year 9 33 mistakes

Real numbers and indices: one quantity, many forms

Calculating with scientific notation

The mistakeFixing a front number below 1 the wrong way. (2 × 10⁵) ÷ (8 × 10²) gives 0.25 × 10³.

Why it happens, and the fixMaking 0.25 into 2.5 multiplies it by 10, so the power of ten must lose a 10: 2.5 × 10², not 2.5 × 10⁴. Check with ordinary numbers: 200000 ÷ 800 = 250.

Multiplying and dividing powers

The mistakeTreating the numbers in front like exponents. 2y³ × 4y² is 8y⁵: the 2 and the 4 are ordinary numbers, so they multiply, and only the exponents add.

Why it happens, and the fixAdding the 2 and the 4 gives 6y⁵, which is wrong, and so is multiplying the exponents to get 8y⁶.

Powers of powers and products

The mistakeSplitting a sum. (3 + 4)² is 7 × 7 = 49, not 3² + 4² = 9 + 16 = 25.

Why it happens, and the fixThe laws work for multiplication and division inside the bracket. They do not work for addition or subtraction: (a + b)² also has the middle term 2ab.

Rational and irrational numbers

The mistake“It goes on forever, so it is irrational.” 0.333… goes on forever and is the fraction ⅓.

Why it happens, and the fixGoing on forever is not the test. The test is whether a block of digits repeats: a repeating decimal is rational, and a decimal with no repeating block is irrational.

Repeating decimals as fractions

The mistakeMultiplying by 10 when the block has two digits.

Why it happens, and the fixWith x = 0.7272…, 10x = 7.2727…: after the point that is 2727…, not 7272…, so 10x − x = 6.5454… and the tail does not vanish. Shift by one whole block: 100x for a two-digit block.

Writing numbers in scientific notation

The mistakeComparing the front numbers first. 9.5 × 10³ = 9500 is less than 1.1 × 10⁴ = 11000, even though 9.5 is bigger than 1.1.

Why it happens, and the fixThe exponent decides the size first. A negative exponent does not make the number negative either; it makes it small.

Zero and negative indices

The mistakeLetting a negative exponent reach the number in front.

Why it happens, and the fixIn 3x⁻² the exponent belongs to x only, so 3x⁻² = 3 divided by x², not 1 divided by (3x²). With a bracket it is different: (3x)⁻² = 1 divided by (9x²), because every factor in the bracket takes the power.

Linear relationships: constant change, and what it lets us say

Constant change and straight lines

The mistakeLosing the sign of a falling change.

Why it happens, and the fixFor the values 50, 44, 38, the change is 44 − 50 = −6, not 6. Always take the earlier value from the later one, so a fall comes out negative and a rise positive.

Writing the equation of a line

The mistakeLosing a sign when the point has a negative x.

Why it happens, and the fixFor P(−3, 2) on a line of gradient 4, c = 2 − 4 × (−3) = 2 + 12 = 14, not 2 − 12 = −10. The point is 3 steps to the left of the y-axis, so the line climbs 12 on the way to x = 0.

y = mx + c

The mistake“c is where the line starts.”

Why it happens, and the fixA line has no start: it goes on both ways. c is the height at which it crosses the y-axis, which is only the place we begin to count from.

Gradient

The mistakeCounting grid squares when the two axes have different scales.

Why it happens, and the fixIf each square across is 2 units and each square up is 5 units, a rise of 3 squares over a run of 4 squares is 15 ÷ 8, not 3 ÷ 4. Count units on the axes, not squares.

Linear models and break-even

The mistakeTreating the break-even as the answer to “which is cheaper?”.

Why it happens, and the fixIt is the point where the answer changes. At 10 uses the bottles are cheaper; at 20 the flask is. The break-even is the boundary, and which side you are on depends on how you will use it.

Parallel and perpendicular lines

The mistakeThinking that any two lines that cross are perpendicular.

Why it happens, and the fixThe lines y = 2x and y = −x cross at the origin, but 2 × (−1) = −2, not −1, so the angle between them is not 90°. Crossing is not enough: check the product.

General form and intercepts

The mistakeLosing the sign when b is negative.

Why it happens, and the fixFor 2x − 7y = 14, putting x = 0 gives −7y = 14, so y = −2, not 2. The line crosses the y-axis below the origin.

Cylinders, cones and spheres: one idea, many solids

Composite solids and choosing a design

The mistakeAdding the surface area of each part as if it were a whole solid.

Why it happens, and the fixA capsule is not two hemispheres and a closed cylinder: the circles where they join are inside, so the surface is the cylinder's curved side plus the two curved hemispheres, 48π + 36π = 84π for the capsule in the figure. Adding a flat circle would count a face that nobody can touch.

Cones

The mistakePutting the slant height l into the volume, where only the perpendicular height h belongs, or the height h into the curved surface, where only l belongs.

Why it happens, and the fixA volume uses the height inside; an area on the surface uses the slant.

Surface area of a cylinder and its net

The mistakeUsing πr (half the circumference) for the width of the rectangle, or forgetting the circles at the ends.

Why it happens, and the fixAnother is adding only one circle: a closed cylinder has a lid and a base, so there are two.

Pyramids

The mistakePutting the slant height into the volume, or the height into the area of a face.

Why it happens, and the fixThe height is inside the pyramid; the slant height is on its surface. If a question gives you the slant height and asks for the volume, find the height first with Pythagoras.

Spheres and hemispheres

The mistakeMixing up the two formulas, or using the diameter in them.

Why it happens, and the fixArea has r squared and a 4; volume has r cubed and 4 divided by 3. The volume of a sphere is not 4 divided by 3 × π × r × r (two radii only) and not 4 × π × r³. Always halve the diameter first.

Volume of prisms and cylinders

The mistakeUsing the diameter where the formula needs the radius.

Why it happens, and the fixA tin that is 10 cm across has a radius of 5 cm, so the base area is π × 5², not π × 10². The other slip is squaring π as well: (πr)²h is wrong; only r is squared.

Equations and linear systems: two facts, one answer

Brackets and both sides

The mistakeDividing only one term.

Why it happens, and the fixDividing both sides of 2x + 6 = 28 by 2 gives x + 3 = 14, not x + 6 = 14: every term on each side is halved. If in doubt, take the 6 away first, then divide.

Break-even, and choosing a method

The mistakeThinking break-even is the profit.

Why it happens, and the fixAt the break-even point profit is zero: the business has only covered its costs. Profit starts with the next item sold. And if the price is no more than the cost of each item, a business with a fixed cost never breaks even, however many it sells.

Elimination

The mistakeSubtracting a negative as if it were a positive.

Why it happens, and the fixIn 5y − (−2y) the answer is 7y, not 3y, because 5 − (−2) = 7. Subtract every term of the second equation, including the total.

Equations with fractions

The mistakeMultiplying only the fraction.

Why it happens, and the fixIn (3x + 1) divided by 2 + 3 = 2x, multiplying by 2 gives 3x + 1 + 6 = 4x, not 3x + 1 + 3 = 4x. Test the wrong version: it gives x = 4, and (12 + 1) divided by 2 + 3 = 9.5 is not 2 × 4 = 8.

How many solutions?

The mistakeMultiplying only the left side. 2x + 3y = 6 and 4x + 6y = 9 look alike, but doubling the first gives 4x + 6y = 12, not 9.

Why it happens, and the fixSame gradient, different total: parallel, so no solution. Also, the same gradient does not always mean no solution: when the intercepts match, the lines are the same line.

Substitution

The mistakeLosing the brackets.

Why it happens, and the fixReplacing y with 4x − 1 in 3y gives 3(4x − 1) = 12x − 3, not 12x − 1. Test with x = 2: y = 7 and 3y = 21; 12 × 2 − 3 = 21, but 12 × 2 − 1 = 23.

Where two lines meet

The mistakeGiving only one number.

Why it happens, and the fixThe solution of a system is a pair: the point (3, 15) means x = 3 and y = 15. Check a pair in both equations: if it fails either one, it is not on both lines.

Ready for Year 10: double brackets and the ideas that carry on

Area and perimeter with algebra

The mistakeTaking the inner area away without its bracket. −x(x + 3) is −x² − 3x, not −x² + 3x: the minus reaches both terms.

Why it happens, and the fixThe lesson works through this one with a checked example.

Area grids for double brackets

The mistakeWriting x × x as 2x.

Why it happens, and the fixIt is x², the area of an x by x square. Test with x = 5: 5 × 5 = 25, but 2 × 5 = 10.

Expanding, simplifying and checking

The mistakeCollecting unlike terms. 2x² + 3x cannot be written as 5x² or 5x³.

Why it happens, and the fixAt x = 2, 2x² + 3x = 14, but 5x² = 20 and 5x³ = 40.

Signs in double brackets

The mistakeDropping a sign in the grid and hoping to put it back at the end.

Why it happens, and the fixIn (x − 8)(x + 1) the cells are x², −8x, x and −8: every cell made with −8 is negative. Write each sign in its cell as you go.

Perfect squares and the difference of two squares

The mistakeUsing the difference of two squares on a sum. x² − 49 = (x + 7)(x − 7), but x² + 49 does not split this way: (x + 7)(x − 7) gives −49, not +49.

Why it happens, and the fixThe pattern needs a minus between two squares.

Year 9 ideas that Year 10 builds on

The mistakeTaking the square root of each term.

Why it happens, and the fixThe square root of x² + 144 is not x + 12: at x = 5 it is 13, not 17.

MYP Year 10 Standard 18 mistakes

Number sets, surds and accuracy: saying exactly how big

Absolute value and error

The mistakeTreating |a − b| as |a| − |b|: |2 − 7| = 5, but |2| − |7| = −5, and an absolute value cannot be negative.

Why it happens, and the fixAnd dividing by the measured value instead of the true value when finding a relative or percentage error.

Prefixes and converting units

The mistakeUsing the length factor for an area or a volume, as in “1 m² = 100 cm²”.

Why it happens, and the fixDraw the square: it is 100 cm along each side, so it holds 100 rows of 100 squares. The other slip is multiplying when going to a bigger unit; check that the number of big units is smaller.

Rationalising denominators

The mistakeMultiplying only the top or only the bottom by √b, which changes the value: both must be multiplied.

Why it happens, and the fixAnd writing √b × √b = b² (or √7 × √7 = 49): a root times itself is the number under the root, so √7 × √7 = 7.

Sets and the number sets

The mistakeA root sign does not make a number irrational: √9 = 3 is a natural number.

Why it happens, and the fixOnly the root of a number that is not a perfect square is irrational. And ∈ is not ⊂: 3 ∈ ℕ says the number 3 is an element, while {3} ⊂ ℕ says the set containing 3 sits inside ℕ. Writing 3 ⊂ ℕ mixes the two up.

Significant figures and estimating

The mistakeRounding to decimal places when the question says significant figures (0.0070496 to 3 decimal places is 0.007, but to 3 significant figures it is 0.00705).

Why it happens, and the fixAnd chopping digits off instead of rounding: 52 870 to 2 significant figures is 53 000, not 52 000, because the next digit is 8.

Simplifying surds

The mistakeWriting the square factor outside instead of its root: √40 = √4 × √10 = 2√10, not 4√10.

Why it happens, and the fixAnd adding under the root: √9 + √16 = 3 + 4 = 7, but √25 = 5, so √9 + √16 is not √25.

Generalising and coordinate geometry: from examples to every case

Conjectures and counterexamples

The mistakeTreating a long run of successes as a proof: the rule above works for many cases and still fails.

Why it happens, and the fixAnd “disproving” with a case that does not meet the conditions: if the claim is about prime n, a composite n is not a counterexample.

Distance and midpoint

The mistakeThinking a negative difference makes the distance smaller: (−4)² = 16, the same as 4², so the sign does not matter once it is squared.

Why it happens, and the fixAnd losing a minus sign in a subtraction: from −6 to 1 is 1 − (−6) = 7, not 5.

Equations of straight lines

The mistakeReading the gradient straight off general form: in 3x + 2y − 6 = 0 the gradient is not 3.

Why it happens, and the fixRearrange first: 2y = −3x + 6, so y = −1.5x + 3 and the gradient is −1.5. And leaving a fraction in general form: x divided by 2 + y = 3 becomes x + 2y − 6 = 0 after multiplying by 2.

Gradient, parallel and perpendicular lines

The mistakeWriting run over rise: a line that rises 2 over 5 has gradient ⅖, not 5 divided by 2.

Why it happens, and the fixAnd giving a vertical line the gradient 0: a vertical line has run 0, so rise ÷ run has no value. It is a horizontal line that has gradient 0.

Proving shape properties with coordinates

The mistakeUsing the midpoint when the point must be on an axis: the midpoint of AB is equally far from A and B, but it is usually not on the x-axis or the y-axis.

Why it happens, and the fixAnd trusting a rounded decimal: equal squared lengths are exact, so compare them instead.

Proving with algebra

The mistakeUsing the same letter for two different numbers: two even numbers are 2a and 2b, not 2n and 2n, unless they are equal.

Why it happens, and the fixAnd ending with a number: “it works for 5 and 8” is not a proof; the last line must show the factor, for example 3(n + 1).

Functions and quadratics: rules, graphs and the equations that come from them

Completing the square and the quadratic formula

The mistakeForgetting the ± when taking a square root: (x + 4)² = 19 has two solutions, −4 + √19 and −4 − √19.

Why it happens, and the fixAnd writing −b ÷ 2a without brackets, or taking the 2a only under the root: the 2a divides the whole top line.

Factorising quadratics

The mistake(x + 4)² is not x² + 16: it is x² + 8x + 16, so the middle term is there.

Why it happens, and the fixAnd x² + 9 is not (x + 3)²: (x + 3)² has a middle term 6x.

Functions, domain and range

The mistakeF(x) is not f multiplied by x: it is one symbol for the output.

Why it happens, and the fixAnd a graph that seems to stop at the edge of a screen has not reached the end of its domain: the window shows only part of it, so the domain comes from the rule, not from the picture.

The null factor law and solving by factorising

The mistakeThe law only works for zero: (x − 3)(x + 2) = 10 does not mean x − 3 = 10 or x + 2 = 10, because many pairs of numbers multiply to 10.

Why it happens, and the fixAnd dividing both sides of x² = 8x by x loses the solution x = 0; move everything to one side and factorise instead.

The discriminant and choosing a method

The mistakeLosing a sign: for 4x² − 6x − 1, b² = (−6)² = 36, not −36, and −4ac = −4(4)(−1) = +16, so Δ = 52.

Why it happens, and the fixAnd reading “no real solutions” as a mistake: it is a true answer, and in a model it can mean a target is never reached.

The three forms of a quadratic

The mistakeReading c in standard form as the vertex's y-coordinate: y = x² − 6x + 10 meets the y-axis at 10, but its vertex is (3, 1).

Why it happens, and the fixAnd the zeros of a(x − p)(x − q) are p and q, not −p and −q.

MYP Year 10 Extended 12 mistakes

Number sets, surds, indices and bounds: being exact, and knowing what you cannot be

Absolute value, equations and error

The mistakeReading |x − 6| > 2 as 4 < x < 8: that is the inside, the numbers within 2 of 6.

Why it happens, and the fixMore than 2 away from 6 means x < 4 or x > 8, two pieces. And giving only one solution to |A| = |B|, or one solution to |x − a| = r: there are two numbers at a given distance from a, one on each side.

Fractional indices

The mistakeApplying a power to only part of a product: (8y⁶) to the power ⅓ is 2y², not 8y², because the cube root acts on the 8 as well as on the y⁶.

Why it happens, and the fixAnd forgetting that a negative exponent does not make the answer negative: 4 to the power −½ is ½, a reciprocal, not −2.

Standard form and compound units

The mistakeFixing a small coefficient the wrong way after dividing: (2.4 × 10³) ÷ (6 × 10⁵) = 0.4 × 10⁻², and that is 4 × 10⁻³, not 4 × 10⁻¹.

Why it happens, and the fixThe coefficient was made ten times bigger, so the power of ten must go down by 1. And using the length factor for an area: 1 m = 100 cm, but 1 m² = 10 000 cm², not 100 cm².

Surds, brackets and conjugates

The mistakeWriting (1 + √3)² as 1 + 3 = 4: the cross term is missing, and it is 4 + 2√3.

Why it happens, and the fixAnd thinking √(a + b) = √a + √b: √(9 + 16) = 5, but √9 + √16 = 7.

Upper and lower bounds

The mistakeRounding the bounds before you calculate with them: keep every digit of each bound and round only the final answer, or a “greatest” result can come out below the true greatest.

Why it happens, and the fixAnd using the same kind of bound for everything: in a subtraction or a division, the number being taken away or divided by needs its opposite bound to make the result as large as possible.

Generalising, coordinate geometry and linear programming: from a pattern to a proof to a decision

Coordinate proof with letters

The mistakeChoosing coordinates that quietly make the shape special: putting A at (0, 0), B at (a, 0) and D at (0, d) gives every quadrilateral a right angle at A, so the proof covers only quadrilaterals with a right angle, not every quadrilateral.

Why it happens, and the fixAnd testing perpendicular with m₁ = −m₂: gradients 2 and −2 are not perpendicular, because 2 × (−2) = −4. The product has to be −1.

Evidence is not a proof

The mistakeGiving the value of the rule instead of the case that breaks it: for n² + n + 41 the counterexample is n = 40, not the number 1681 that it produces.

Why it happens, and the fixAnd testing only the first few cases: a claim about every whole number has to survive n = 0 and large values of n, not just 1, 2 and 3.

Inequalities and regions

The mistakeReversing the sign when nothing negative multiplies or divides: adding or subtracting a negative number keeps the direction, so x − 4 > −9 gives x > −5.

Why it happens, and the fixAnd changing only the middle of a double inequality: every part changes together, so 4 < x + 3 < 10 gives 1 < x < 7.

Linear programming at the vertex

The mistakeUsing a corner that is not in the feasible region: two boundary lines meet somewhere, but if that point breaks another constraint it is not a vertex of the region.

Why it happens, and the fixAnd stopping at a number: the answer to a linear programming problem is a decision in the words of the problem, such as “bake 4 trays of bread and 6 of pastries” or “make 5 totes and 4 purses”, with its units.

One, none or infinitely many

The mistakeDividing by an expression that can be zero: dividing both sides of x(y − 2) = 3(y − 2) by y − 2 leaves x = 3 and loses every solution with y = 2, such as (7, 2).

Why it happens, and the fixAnd multiplying only one side: 2(x + y = 3) is 2x + 2y = 6, not 2x + 2y = 3.

Proving with the general case

The mistakeTaking away only the first term of a bracket: x − (y + 3z − 2) is x − y − 3z + 2, because every sign inside the bracket changes.

Why it happens, and the fixAnd ending on the algebra: a proof finishes with a sentence that says what the last line shows, such as “so it is a multiple of 5 for every whole number n”.

Functions, quadratics and transformations: one family, many forms

Translating, reflecting and dilating a graph

The mistakeWorking the numbers outside the bracket in the wrong order: 2f(x) + 1 doubles each height and then adds 1, so a height of 4 becomes 9, not 10.

Why it happens, and the fixAnd reading f(3x) as a stretch: the input grows 3 times as fast, so features arrive 3 times sooner and every x-coordinate is divided by 3.

MYP Year 11 Standard 8 mistakes

Sequences, formulae and proportion: rules that reach any term, any letter and any value

Arithmetic sequences and the nth term

The mistakeCounting n steps instead of n − 1: from term 1 to term 8 there are 7 jumps, not 8.

Why it happens, and the fixAnd accepting a position that is not a whole number: 4n + 1 = 30 gives n = 7.25, so 30 is not a term of 4n + 1 at all.

Direct and inverse proportion

The mistakeFinding k the wrong way up: in y = kx, k is y ÷ x, so y = 18 when x = 3 gives k = 6, not 3 ÷ 18.

Why it happens, and the fixAnd forgetting the power when you find k: if y = kx² and y = 80 when x = 4, then k = 80 ÷ 16 = 5, not 80 ÷ 4 = 20.

Geometric sequences

The mistakeDividing the wrong way round: the ratio of 50, 10, 2 is 10 ÷ 50 = ¹&frasl;5, not 50 ÷ 10 = 5.

Why it happens, and the fixAnd losing the brackets on a negative ratio: (−2)⁴ = 16, but −2⁴ means −(2⁴) = −16.

Growth and decay by a percentage

The mistakeRounding too early: 50 000 × 1.07² is 50 000 × 1.1449 = 57 245, but rounding 1.1449 to 1.14 first gives 57 000.

Why it happens, and the fixAnd counting years like the terms of a sequence: after 0 years the value is the start, so after t years the power is t, not t − 1.

Rearranging formulae

The mistakeUndoing a subtraction from a number: from y = 10 − x, x = 10 − y, not y − 10.

Why it happens, and the fixAnd undoing a half: the inverse of × ½ is × 2, so from A = ½bh, b = 2A ÷ h, not A ÷ 2 ÷ h.

Second differences and quadratic sequences

The mistakeStopping at the first differences: 5, 9, 13 are not equal, but that does not make the sequence unpredictable.

Why it happens, and the fixAnd using the second difference as the number in front of n²: a second difference of 12 means 6n², not 12n².

The nth term of a quadratic sequence

The mistakeSquaring the wrong thing: 3n² at n = 5 is 3 × 25 = 75, not 15² = 225.

Why it happens, and the fixAnd forgetting that the remainder is a rule in n: the remainders 9, 7, 5, 3 mean 11 − 2n, so the final rule is an² − 2n + 11, not an² + 11.

When the subject appears twice

The mistakeLosing the 1 when you factorise: xy + x = x(y + 1), not xy, because the x on its own is 1 × x.

Why it happens, and the fixAnd expanding only part of a bracket after clearing a fraction: y(x − 5) is xy − 5y, not xy − 5.

IB Maths Analysis and Approaches (AA) 37 mistakes

Number and Algebra

The binomial theorem

The mistakeThe bracket's own coefficient is raised too.

Why it happens, and the fixFor (1 + 2x)⁷ the x³ coefficient is C(7,3) × 2³ = 280, not 35. Forgetting the 2³ is out by a factor of 8 and is the standard slip.

Complex numbers in Cartesian form

The mistakeWriting arctan(b divided by a) as the argument.

Why it happens, and the fixIt is right in two quadrants out of four and silently 180° out in the other two, and the modulus is no help because all four of these numbers have modulus 5. On Paper 1, where there is no angle(function to save you, the sketch IS the method. Draw the point before you touch the arctan.

Counting principles

The mistakeOrder decides the button.

Why it happens, and the fixPrizes that differ are nPr; a team is nCr. Getting this wrong gives an answer out by a factor of r!, which here is 6, and nothing on the screen will object.

The sum of an infinite convergent geometric sequence

The mistakeUsing the formula without checking |r| < 1.

Why it happens, and the fixIt is one inequality, and whenever a question asks you to justify that the sum exists, or for which values the series converges, it is a mark in its own right, because the examiner wants to see that you know when the formula applies. The other half of the same trap is testing r > 0: r = −0.6 converges perfectly well, to 1.25, and rejecting it loses the whole question.

Systems of linear equations

The mistakeA refusal to solve is information.

Why it happens, and the fix"No solution" means the planes do not meet at a point, and the question usually wants that described, not a number. Students retype the equations assuming they mistyped.

Laws of exponents with rational exponents and laws of logarithms

The mistakeWriting log a + log b as log(a + b).

Why it happens, and the fixIt is log(ab), and the two differ by a real amount: 0.778 against 0.699 on the smallest pair of distinct integers above 1. The habit that prevents it: say the law out loud as "adding logs MULTIPLIES", every time you use it. And note the argument order trap above, where the Casio wants the base first and the Nspire wants it second, which silently returns log74 = 0.712 instead.

Modulus-argument and Euler form

The mistakeAdding the moduli and the arguments.

Why it happens, and the fixIt is the right rule for the wrong operation, and it gives 5 cis 75° where the answer is 4.96 cis 39.01°. The check that catches it in one line: a sum's modulus can never exceed the sum of the moduli, so if your answer's modulus is exactly 5 when the parts are 2 and 3, the two numbers must point the same way, and these are 15° apart. Also watch the mode: in radians, 2&ang;30 means 30 radians.

Functions

Composite and inverse functions

The mistakeComposing in the order the letters are written rather than the order they act.

Why it happens, and the fix(f &compfn; g) means g first, because g is the one touching the x. The habit that fixes it: never write f &compfn; g without immediately writing f(g(x)) underneath, with the brackets. Then the inside-out reading is on the page and cannot be misremembered under pressure.

Exponential and logarithmic functions

The mistakeWriting 2x where 2 to the power x belongs, or the reverse.

Why it happens, and the fixThey agree at exactly two points and a question is unlikely to use either of them. The habit: say the expression out loud. "Two to the x" and "two x" are different words, and students who only ever read them silently blur them under pressure. On the Casio, note also that logab wants the base first, so logab(2,X) is log base 2 of x and the other order gives something else without complaining.

Rational functions with quadratics

The mistakeGiving a horizontal asymptote because the previous sub-topic always had one.

Why it happens, and the fixIt is the single commonest error here and it is a habit rather than a misunderstanding. The habit to replace it with: write down the two degrees before you write anything about an asymptote. Two numbers, and they tell you which of four cases you are in.

Solving inequalities

The mistakeGiving one interval when the answer is a union.

Why it happens, and the fixIt happens two ways: multiplying through by something of unknown sign, and forgetting that the zero of a denominator is a critical value. Both produce a tidy single interval, which is what makes them convincing. The habit: count the critical values, add one, and that is how many regions you must test. Two critical values means three regions, every time.

Modulus graphs and equations

The mistakeDrawing y = f(|x|) by reflecting the part below the axis.

Why it happens, and the fixThat is the other graph. The two instructions sound alike and do entirely different things, and a sketch drawn with the wrong one is wrong everywhere on the left. The habit: say out loud which axis you are folding about before you draw a single line. Outside means the x-axis; inside means the y-axis.

Odd, even and self-inverse functions

The mistakeFinding the inverse of a quadratic and not stating the restricted domain.

Why it happens, and the fixThe algebra is usually right and the answer is incomplete, which is the most annoying way to lose a mark. The habit: whenever you take a square root while inverting, write down which half you kept and why. One line, one mark.

Polynomial functions

The mistakeGiving the constant term as the product of the roots on an odd-degree polynomial.

Why it happens, and the fixIt is right half the time, which is the worst possible frequency: often enough to feel like a rule, not often enough to be one. The habit: write (−1)ⁿ before you write anything else, and for a cubic that is −1, so the constant term's sign flips.

The reciprocal and rational functions

The mistakeGiving the asymptotes the wrong way round.

Why it happens, and the fixx = 2 and y = 4 is an answer with the right numbers in the wrong roles, and nothing in the algebra objects. The habit that prevents it: the vertical one comes from the bottom of the fraction, because that is the x the function is not allowed to have. Say "bottom, so vertical" every time. Then test it: substitute x = 2 and see that the curve is quite happily at −3.5.

Solving equations graphically and analytically

The mistakeReporting one root when the question asked you to solve the equation.

Why it happens, and the fixA solver returns a single answer and says nothing about how many there are. Graph it, count the crossings in the interval you were given, and if there are infinitely many, say so. On e to the power 2x − 5e to the power x + 4 = 0 the same habit catches the dropped x = 0: two values of u mean two equations to solve, not one.

Quadratic equations and the discriminant

The mistakeGiving the interval and forgetting that a must not be zero.

Why it happens, and the fixOn 3kx² + 2x + k = 0 the discriminant is cheerfully positive at k = 0, so no amount of care with the inequality will catch it; you have to look at the a. The habit: write down a, b and c as three separate things before you write &Delta;, and if any of them contains the unknown, deal with it there and then.

Quadratic equations and the discriminant

The mistakeWriting 5 < x < 1.

Why it happens, and the fixIt is what comes out of "x < 1 or x > 5" if you try to compress two pieces into one interval, and it describes the empty set. If the two pieces do not join, say "or" and leave them apart.

The quadratic function

The mistakeWriting the vertex of a(x − h)² + k as (−h, k).

Why it happens, and the fixThe minus is already printed in the formula, so 2(x − 3)² − 8 has h = 3. The check that kills it: the axis of symmetry is the average of the roots, (1 + 5) divided by 2 = 3, and also −b divided by (2a) = 12 divided by 4 = 3. Two independent routes to the same 3, and neither of them is −3.

Transformations of graphs

The mistakeDoing the translation before the stretch when the equation says otherwise.

Why it happens, and the fix3x² + 2 has the 3 applied to the function and the 2 added afterwards, so the stretch is first. Read the expression from the outside in: the outermost operation was done last. The other half of the same mark is the sign inside the bracket, where (x − 3)² moves RIGHT; check it by asking where the bracket is zero, which takes four words and never misleads.

Geometry and Trigonometry

Arcs, sectors and segments in radians

The mistakeGiving the sector when the question said segment.

Why it happens, and the fix18.85 against 3.26 is not a rounding, and no sanity check on size will save you, because both are comfortably inside the circle. The habit: before any arithmetic, shade the region on the diagram with your pencil. If your shading has a straight chord across it, you need the triangle subtracted; if it has two straight radii, you do not.

The circular functions

The mistakeGiving 2π as the period because the function is a cosine.

Why it happens, and the fixIt is the commonest single error in the sub-topic and it survives a sketch, because a sketch with the wrong period still looks like a cosine. The habit: write "period = 2π divided by b" before you write a number, every time, even when b is 1. The line costs four seconds and it is also frequently a method mark.

Compound angle identities

The mistakeThe sign in cos(A + B).

Why it happens, and the fixIt flips, and nothing about the expression reminds you. The habit: substitute A = B = 45° into whatever you have written. cos 90° is 0, so the right version gives 0 and the wrong one gives 1. It takes five seconds and it is the only check that works without a calculator.

Intersections and angles of lines and planes

The mistakeGiving the angle to the normal when the question asked for the angle to the plane.

Why it happens, and the fix63.61 and 26.39 are both plausible answers and the working is identical up to the last line. The habit is to name the two objects that meet: line and plane means arcsin; two lines or two planes mean arccos. Write which one you are using before you press the key.

The equation of a plane

The mistakeUsing a direction in the plane where the normal was needed.

Why it happens, and the fixBoth are three numbers, both look like vectors, and the resulting equation is a perfectly well-formed plane equation for the wrong plane. The habit: after writing any plane equation, dot its coefficients with a direction you know is in the plane and check you get zero. One line, and it catches the whole class of error.

Reciprocal and inverse trigonometric functions

The mistakeWriting sin⁻&sup1;x for 1 divided by sin x, or reading a question's sin⁻&sup1; as a reciprocal.

Why it happens, and the fixThe notation is genuinely unfortunate and the examiners know it, which is why they write arcsin in the guide. The habit: read sin⁻&sup1; aloud as "arcsin", never as "sin to the minus one". If you say the word you cannot make the error.

The scalar product

The mistakeTaking the inverse cosine of the scalar product itself.

Why it happens, and the fixarccos(6) does not exist, so the machine errors and students assume they have mistyped. The product must be divided by the two magnitudes first, and the result has to land between −1 and 1. The habit: write cos θ =... before you write θ =..., so the division cannot be skipped.

Coincident, parallel, intersecting and skew lines

The mistakeSolving two equations and concluding the lines meet.

Why it happens, and the fixTwo equations in two unknowns almost always have a solution, so finding &lambda; and &mu; proves nothing at all. The habit: write down the third equation before you solve anything, so it is on the page waiting to be tested rather than forgotten.

Symmetry of the trigonometric graphs

The mistakeUsing the sine's symmetry on a tangent equation.

Why it happens, and the fixFor tan x = 0.5 the second solution is π + 0.4636 = 3.6052, and a student who writes π − 0.4636 = 2.678 gets a number whose tangent is −0.5. The habit: name the function before you pick the symmetry. Sine partners with π − x, cosine with 2π − x, tangent adds π.

The trigonometric identities

The mistakeTaking the inverse cosine, rounding it, and working from the rounded angle.

Why it happens, and the fixIt usually gets within a rounding of the right answer and sometimes does not, and on Paper 1 it is not available at all. It also throws away the exact form the question was built to produce. The habit: if the question gives you a ratio as a fraction, the answer is a surd and the angle is not part of the method.

The unit circle and exact values

The mistakeReporting the acute angle only.

Why it happens, and the fixThe calculator's inverse sine returns one value by design, because a function cannot return two, and the second solution is mathematics the machine is not being asked for. The habit: every time you take an inverse sine in a triangle, write 180 − your answer beside it and then test whether it fits. On an inverse cosine you do not need to, because the cosine is negative in the second quadrant and the calculator will hand you the obtuse angle itself.

Solving trigonometric equations

The mistakeGiving the solutions from one cycle when the interval covers two.

Why it happens, and the fixIt is worth saying how this looks to an examiner: two correct values and two missing is not a half-understood answer, it is an answer to a different question. The habit: before solving, write the interval as a number of cycles. 0 to 4π is two. Then you know to expect double whatever the first cycle gives.

The vector equation of a line

The mistakeAssuming a different equation is a wrong equation.

Why it happens, and the fixStudents who match the mark scheme's a and b exactly are fine; students who do not often rewrite perfectly good work. The habit: run the two checks. Is their a a point on your line, and is their b a multiple of your b? Both yes means the same line. Converting to Cartesian form is useful because the parameter is gone, but the Cartesian form is not unique either: it still carries the point and the scale you started from. The pair in question 5 below reduces to (x − 1) divided by 2 = (y − 2) divided by (−1) = (z − 3) divided by 2 and to (x − 3) divided by 4 = (y − 1) divided by (−2) = (z − 5) divided by 4. Those are the same line, written two ways. Waiting for the two forms to match character for character is the error, not the test.

The vector product

The mistakeGiving the parallelogram's area where the triangle's was asked for.

Why it happens, and the fixThe vector product and its magnitude usually keep their method marks, but the final mark goes, and the working looks flawless. The habit: underline the word "triangle" or "parallelogram" in the question before you start, and write "× ½" next to it if it says triangle.

The concept of a vector

The mistakeWriting AB = a − b.

Why it happens, and the fixIt is the right idea with the subtraction the wrong way round, and it gives a vector of the correct length pointing backwards, so the magnitude is right and everything with a direction in it is wrong. The habit: say "destination minus start" out loud. AB goes to B, so B's position comes first.

Statistics and Probability

The regression line of x on y

The mistakeSwapping the lists is not the same as rearranging the line.

Why it happens, and the fixRearranging y on x minimises the wrong distances and gives a different, wrong prediction. The two gradients multiply to r², which is the quickest check you did it properly.

Standardising and z-values

The mistakeDo not standardise twice.

Why it happens, and the fixFeeding a z score into a dialog that still holds the original &mu; and &sigma; is the error, and the answer looks plausible. Decide once whether you are working in x or in z.

IB Maths Applications and Interpretation (AI) 57 mistakes

Number and Algebra

Amortisation and annuities

The mistakePayment 1 is mostly interest.

Why it happens, and the fixStudents expect roughly half and half. Check the first payment against the total and the shape of the whole loan becomes obvious, which is the actual teaching point.

Arithmetic sequences and series

The mistakeThe formula is still worth a mark.

Why it happens, and the fixA number with no rule written down scores less than the rule with an arithmetic slip, so write un = 24 + 4(n − 1) before you reach for anything.

Compound interest, depreciation and real value

The mistakeMonthly for 10 years is N = 120, not N = 10.

Why it happens, and the fixPut 10 in N with CpY at 12 and you have compounded for ten periods instead of a hundred and twenty. The answer looks plausible rather than wrong. When you give the solver both PV and FV they also need opposite signs.

Eigenvalues and eigenvectors

The mistakeEigVc gives you decimals, not a clean pair.

Why it happens, and the fixFor this matrix it returns about (−0.832, −0.555): the same direction scaled to length 1. Divide through to get (3, 2) and state that, because the markscheme wants the simple multiple. On a Casio there is no function at all, so the trace and determinant route is not optional.

Exponents and logarithms

The mistakeRead the question before rounding.

Why it happens, and the fixt = 18.07 weeks means the total is not passed until week 19. An exact decimal rounded down is the commonest lost mark on growth questions.

Geometric sequences and series

The mistakeNo machine will tell you the sum to infinity does not exist.

Why it happens, and the fixFeed it r = 1.25 and the formula returns a confident negative number for a series of positive terms. Checking |r| < 1 is yours, not the calculator's.

The sum of an infinite geometric sequence

The mistakeSettling is not proving.

Why it happens, and the fixA partial sum that stops changing on the screen only means the later terms fell below the display precision. The convergence condition |r| < 1 is the argument; the screen is the illustration.

Matrices

The mistakeOrder matters.

Why it happens, and the fixAB and BA are different matrices and usually only one of them means anything in the context. Decide which quantity is being transformed before you multiply.

Solving systems and polynomials with technology

The mistakeThree unknowns needs three equations.

Why it happens, and the fixStudents set up two and expect a point. Two planes meet in a LINE, and the solver will tell you there is no unique solution rather than that you are missing an equation.

Standard form and order of magnitude

The mistake6.2E−5 is the machine's writing, not yours.

Why it happens, and the fixCopying the screen straight onto the paper loses the mark: it must be written 6.2 × 10⁻⁵. The calculator is allowed to be lazy about this and you are not.

Functions

Modelling with functions

The mistakeReporting r² = 1 as evidence that the model is right.

Why it happens, and the fixFit a quadratic to three points and r² is 1 every time, because three points determine a quadratic exactly. It is arithmetic, not agreement. An exponential through the same three points also fits perfectly and predicts eighteen times as much by hour ten. If you quote a fit, quote what else fits as well.

Composite and inverse functions

The mistakeComposing in the reading order.

Why it happens, and the fix(f ∘ g)(x) is f(g(x)), so g runs first, and a student who works left to right computes the other composite and gets a number that is wrong by exactly the amount this page is about. Write the brackets out before touching the machine. The other one is forgetting that the inverse of a composite reverses the order as well as each step: undo the last operation first.

Graphing functions

The mistakeCopying the window instead of the graph.

Why it happens, and the fixOn the default window this cubic is a near-vertical line through the origin and both turning points are invisible, so a sketch made from it has no features to label and cannot score. Set the window deliberately, find the features with the machine, and then draw. And on the Casio, G-SOLVE is SHIFT F5, not F5.

Functions, domain and range

The mistakeGiving the range as an interval of the window you happened to choose.

Why it happens, and the fixSet Ymax to 5 and the curve fills the screen, so a student writes "0 to 5". Go to x = −100 and f(x) is just over 10. The range has no upper end, and no window will show you that; only the formula will. The other one is writing the domain and the range the same way round, so check which axis you are describing before you write a single inequality.

Further models

The mistakeGiving the Solver a starting value that sends it to the wrong root, and not noticing.

Why it happens, and the fixBoth of these equations have one sensible solution, but the solver reports whatever it converges to, so check it: put your C and k back in and confirm P(0) = 2 and P(1) = 4. The other one is degrees mode, which at Higher Level turns a 24-hour period into about 1375 hours, so the model comes out almost flat across a whole day without a single error message.

Key features of graphs

The mistakeFinding one root and stopping.

Why it happens, and the fixEvery one of these tools answers once per go, so a question worth two marks for "the zeros" wants you to run it twice. The other one is accuracy: reading 1.6 off the screen when the tool says 1.618 and the question asked for three significant figures. Use the tool's number, not the picture's. And on the Casio, G-SOLVE is SHIFT F5, not F5.

Linearising data with logarithms

The mistakeStopping at the straight line.

Why it happens, and the fixThe regression gives you the gradient and the intercept of the LOG plot, and the question asked for the model. Convert both: base e to the gradient, coefficient e to the intercept. The other one is using log base 10 for one list and natural log for the other: either base works throughout, and mixing them gives a gradient that is right for neither.

Equations of a straight line

The mistakeGiving the gradient as an angle, or an angle as a gradient.

Why it happens, and the fixIf a question asks for the gradient of an access ramp and you write 4.8°, you have answered a question nobody asked. The other one is the Casio's letters: in y = ax + b the gradient is a, and students who learned y = mx + c reach for b and write the intercept down as the gradient.

The modelling process

The mistakeGiving a prediction with no comment.

Why it happens, and the fix"After a year the height is 1484 cm" is arithmetic and earns the arithmetic mark only; the reflection mark needs the next sentence. The other one is entering the equations in the wrong order on the Casio, where c = 2 has to go in as 0 0 1 | 2 and students put the 2 in the first column, which solves a different system without complaining.

Transformations of graphs

The mistakeWriting the horizontal transformation with the wrong sign.

Why it happens, and the fixA translation 3 to the right is f(x − 3), and students write f(x + 3) because the graph went the positive way. Test it on one point before committing: if the old graph had a vertex at x = 0 and the new one has it at x = 3, substitute x = 3 and see which version gives you the old output. The other one is giving a horizontal stretch factor of q instead of 1 divided by q.

Geometry and Trigonometry

Adjacency matrices

The mistakeReading the wrong entry.

Why it happens, and the fixThe question asks for walks from 1 to 3 and the student gives the 3,1 entry, or counts rows from the bottom. On a symmetric matrix the first mistake is invisible because the two entries agree; on a directed graph it is wrong and looks fine. Write the vertex labels along the top and down the side of the matrix on your page, every time, before entering anything. It costs six characters and removes the entire error class.

Arc length and sector area

The mistakeTyping the whole-circle formula and forgetting the fraction.

Why it happens, and the fixAt r = 9 the arc is 21.99 and the full circumference is 56.55, so that one at least looks wrong. At r = 6 it does not: the full circumference is 37.70 and the sector area is 37.70, and the two halves of the question seem to agree with each other. Put the θ divided by 360 in first, before the rest of the expression, so you cannot leave it out.

Applications of trigonometry including bearings

The mistakeWriting 65 as the bearing.

Why it happens, and the fixIt is an acute angle off a north or south line, not a bearing, and 065 points north-east while the boat is south-east. The machine has no idea which, because you only gave it two lengths. Draw the sketch, see that the boat is south and east, and take 65 off 180 to get 115. The other one is writing a bearing with two figures: it is 062, not 62.

Graph theory

The mistakeCounting edges off a drawing.

Why it happens, and the fixOn the figure's graph, three pairs of edges cross and the usual miscounts are 6 and 8. The degree sum takes the same information and halves it, and a miscounted degree shows up as an odd total, which tells you immediately that you have gone wrong. An odd degree sum is never the graph's fault; it is always yours.

Geometric transformations with matrices

The mistakeMultiplying in the order the words appear.

Why it happens, and the fix"Rotate, then reflect" becomes MR, with the rotation on the RIGHT, because it is the one that touches the vector first. Writing RM there gives a reflection in the other line, a wrong image, and a determinant that looks perfectly healthy. Both machines will happily compute the wrong product. The check is to send (1, 0) through by hand and see whether the answer matches the picture.

Equations of perpendicular bisectors

The mistakeHalf a negative reciprocal.

Why it happens, and the fixFrom ⅔, writing 3 divided by 2 or −⅔ instead of −3 divided by 2. Both are wrong and both look like you did something. Multiply your two gradients together before you write the equation down: if the answer is not −1, stop. And on the screen, a bisector only looks perpendicular when the x and y scales match, so do not judge it by eye on a default window.

Radians

The mistakeLeaving the machine in degrees from Topic 3's Standard Level work.

Why it happens, and the fixThe IB rule is that a Higher Level paper assumes radians unless a degree symbol appears, and plenty of them appear: 3.8 does the whole ambiguous case in degrees, 3.10 resolves forces at 60° and 120°, and 3.13 reports an angle of 27.3°. So the mode is set by the question in front of you, not by where you are in the topic, and nothing reminds you. The symptom is an answer that is 57.3 times too big or too small, so if a sector comes out larger than its circle, check the mode before you check the arithmetic.

Tree and cycle algorithms

The mistakeForgetting the edge home.

Why it happens, and the fixOn the nearest neighbour route the four steps total 14 and the return from C to A is 9, which is the single most expensive edge in the graph and the one you have no choice about. 14 is the commonest wrong answer here and it is 9 short. Write the starting town at both ends of your route before you add anything up, so the final edge is on the page before the arithmetic starts.

The scalar and vector products

The mistakeGiving the parallelogram's area when the question asked for a triangle.

Why it happens, and the fix|v × w| = 4.12 is the parallelogram; the triangle is 2.06. The two differ by a factor of two, which is large enough to be wrong and small enough to look right. Read the question twice and write "triangle, so halve it" on the page before you compute anything. And set degrees mode before the inverse cosine, or 27.3 arrives as 0.476.

The sine and cosine rules

The mistakeC has to be the side opposite the angle you want.

Why it happens, and the fixPair them wrongly and you get (5²+8²-6²) divided by (2×5×8) = 0.6625, so 48.5°, and nothing complains: 48.5° really is an angle of that triangle, just not the one you were asked for. That is why it survives checking. Two smaller ones: brackets round the whole denominator, or the division happens before the multiplication and the machine returns a domain error; and radians, where cos⁻&sup1;(−0.05) comes back as 1.62.

The unit circle and the ambiguous case

The mistakeTaking the one answer the inverse sine key gives and moving on.

Why it happens, and the fixIt returns the acute solution every time, by design, and in the ambiguous case the obtuse one is just as real. Either graph it and count, or write 180 minus your answer down beside it and then check whether the third angle stays positive. And on the Casio, G-SOLVE is SHIFT F5, not F5 alone.

Three-dimensional geometry

The mistakeA machine left in radians gives 0.46.

Why it happens, and the fixThat does not look like a wrong angle, it looks like a wrong method, so it rarely gets spotted. Check the mode indicator before the first question of every paper, and if an angle comes back smaller than 1.6 when you expected tens of degrees, that is what happened.

The vector equation of a line in two and three dimensions

The mistakeChecking only one component.

Why it happens, and the fixFor (5, 5) on (1,2)+t(3,4): the x equation gives 1 + 3t = 5, so t = 4 divided by 3, and a student who stops there announces the point is on the line. The y equation gives 2 + 4t = 5, so t = 0.75. Two different values of t, so the point is not on the line. Both components, every time, or use the cartesian form which cannot be half-checked.

Vector applications to kinematics

The mistakeGraphing one component instead of the distance.

Why it happens, and the fixTyping 10-3X and finding where it is zero gives 3.33, the wrong answer, and the graph looks perfectly sensible. The function to minimise is the length of AB, with both components inside the square root. Write AB = (10 − 3t, −t) on the page first and type from that, not from the question.

Vectors and scalars

The mistakeWriting |a + b| = |a| + |b|.

Why it happens, and the fixIt is true only when the two point the same way, and it is the step that turns a 3.61 into a 7. The habit that prevents it: never add two magnitudes. Add the vectors, componentwise, and take the magnitude once at the end. On the Casio, note also that the command is Norm(, not Abs: Abs is for real and complex numbers and will not take a vector at all.

Voronoi diagrams

The mistakeAnswering with the centroid.

Why it happens, and the fixIt is a real point with a real name and it is 4.00 from its nearest depot where the vertex is 4.33, so it loses the accuracy mark and usually the reasoning mark with it. The other one is giving the vertex and stopping: the question asks how far the station is from the nearest depot, so quote the 4.33 as well, and say which three sites it is equidistant from.

Statistics and Probability

Averages and spread

The mistake&sigma;x and sx are not the same number.

Why it happens, and the fix&sigma;x divides by n and sx divides by n − 1. When a question asks for the standard deviation of a data set, quote &sigma;x. The n − 1 version appears at AI Higher Level, as the unbiased estimate of a population variance from a sample.

The binomial distribution

The mistake"More than 3" starts at 4.

Why it happens, and the fixFor B(10, 0.3) a lower bound of 3 returns 0.6172 when you wanted 0.3504, which is 1.76 times too big and does not look wrong on the screen.

Chi-squared tests for independence and goodness of fit

The mistakeCheck the expected frequencies before you trust the verdict.

Why it happens, and the fixAny expected value below about 5 and the test is not valid, however confident the p-value looks. The calculator will not refuse to run it.

Confidence intervals

The mistakeEnter the confidence level as 0.95.

Why it happens, and the fixThe Nspire wants it between 0 and 1. The fx-CG50 will accept 95 and divide by 100 for you, so the two machines disagree and 0.95 is the habit that travels. Then say what the interval means about the METHOD, not about this one interval.

Correlation and regression

The mistakeThe calculator will happily extrapolate.

Why it happens, and the fixIt has no idea the test is marked out of 100, so for twenty hours of revision this line returns 131. The GDC gives the line; deciding where the line means anything is yours.

Non-linear regression and sum of squared residuals

The mistakeTwo different forms of the same model.

Why it happens, and the fixA calculator may give y = ab to the power x where the question wants y = ae to the power kx. They are the same curve: k = ln b. Converting is a mark, and so is noticing you need to.

The normal distribution

The mistake&sigma;, never &sigma;².

Why it happens, and the fixX ~ N(100, 225) means you type 15. A variance typed where the standard deviation belongs returns a perfectly believable probability and nothing on the screen flags it. The empty-bound error at least shows you an error; this one does not.

The Poisson distribution

The mistakeThe Cdf bounds are off by one from the words.

Why it happens, and the fix“At least 3” needs a lower bound of 3; “more than 3” needs 4. Same dialog as the binomial, same slip, and scaling &lambda; correctly does not save you from it.

Presenting data: histograms, cumulative frequency and box plots

The mistakeTurn the outlier setting on deliberately.

Why it happens, and the fixA Casio MedBox can plot with or without outliers shown, and the two pictures tell different stories about the same data. Know which one you drew.

Spearman's rank correlation coefficient

The mistakeTied values share the average rank.

Why it happens, and the fixTwo items tied for third and fourth are both 3.5, not both 3. Getting ties wrong changes rs and is the only fiddly part of the whole method.

Calculus

Differential equations and separation of variables

The mistakeA solution with the constant still in it has not answered the question.

Why it happens, and the fixThe initial condition picks out one curve from a whole family, and leaving c unresolved is the standard lost mark however neat the integration was.

Euler's method

The mistakeEuler undershoots a curve that bends upwards, every time.

Why it happens, and the fixIf your answer is above the exact value you have made an arithmetic error, not a rounding one. Knowing the direction of the error before you start is the real check.

Integration and the area under a curve

The mistakeAn integral is not an area when the curve dips below the axis.

Why it happens, and the fixThe calculator returns the signed value and will quietly cancel the two halves. Split at the crossing and take each piece positive.

Integration by inspection and substitution

The mistakeA decimal is not an integral.

Why it happens, and the fixWhen a question says find the integral, it wants the expression with + c, and a number from the machine scores nothing there. And in degree mode every trigonometric integral comes out wrong without any warning.

Limits and the derivative as a gradient

The mistakeThis gives a number, never a rule.

Why it happens, and the fixA question asking you to differentiate wants the expression. Producing 2 from the calculator when the answer is 2x scores nothing, even though it is right at that point.

Optimisation in context

The mistakeThe invalid root is a minimum, so the machine will never flag it.

Why it happens, and the fixAt x = 6 the volume is 0, not a maximum, which is exactly why it survives into a written answer unrejected. Only the domain line forces you to name it and reject it, and the reason is the mark.

The second derivative and concavity

The mistakeA point read off a graph is not a justification.

Why it happens, and the fixWhen a question says classify or justify, write the sign of f&Prime; and the conclusion it gives, or the sign change of f&Prime; either side of an inflexion. The screen only confirms it.

Stationary points, local and global

The mistakeA graph only shows the window you chose.

Why it happens, and the fixA turning point outside it does not exist as far as the machine is concerned. Set the window from the question's domain before you conclude there is only one.

Tangents and normals

The mistakeThe screen shows a gradient, not a point.

Why it happens, and the fixThe y value still comes from putting x into the curve, and that is the mark most often lost. When the line is finished, put x back into it: it must give the curve's y value.

The trapezoidal rule

The mistakeFive readings mean four strips.

Why it happens, and the fixh is the gap between readings, not the number of them. Count five strips and you divide by the wrong h, and every figure after that is wrong.

Area about either axis, and volumes of revolution

The mistakeBracket the radius before you square it.

Why it happens, and the fixWithout the bracket the machine squares only part of it and returns a confident wrong number. About the y-axis the integrand is π times x² rewritten in terms of y, and the limits are y values; the machine does not care which letter you type, only that the limits belong to it.

Want the whole lesson, not just the warning?

Each lesson linked above has a worked example, a check you can run on your own answer, and a sample you can try before choosing a plan.

Browse all lessons